Genie INTELLIG 4024H Operation And Maintenance Manual

Also see for IntelliG 1200 4024: Operation and maintenance manual

Contents

Genie INTELLIG 4024H Operation And Maintenance Manual Manual pdf 21 page image

CHAIN OR BELT - TENSION ADJUSTMENTWARNING• Observe all safety warning and precautions!• Disconnect power from opener and disconnectcarriage in rail from bullet before beginning thistask.Visually inspect the chain or belt every 6 months.NOTE: Tension adjustments should be made with thedoor in the down position and the carriage released.• At the center of the rail the chain or belt shouldnot be resting on the rail. See adjustmentillustration on right.– With the bullet NOT engaged to the carriage,tighten adjustment nut until chain/belt doesnot, at the center of the rail, rest on rail. Do NOTovertighten.• Is there rust on chain or frayed edges on belt?– Contact a trained door system technician forchain/belt replacement.• Are there kinks or twists in the chain or belt?– Contact a trained door system technician forchain/belt replacement.Tighten nut to increasetension on chain or beltChainChainChain at center of railApprox. 1/8"Adjustment requiredCorrectly adjustedBeltBeltBelt at center of railApprox. 1/8"Adjustment requiredCorrectly adjustedBELTCHAIN©2010 The Genie Company 12/2010 21REMOTE BATTERY REPLACEMENTReplace remote battery with a CR 2032 coin cell battery.1. Open the remote case using a washer or coin that fitsinto the slot at the top of the remote.2. Replace battery.3. Align components and snap case closed.