Genie S-105 Operator's Manual

Also see for S-100: Maintenance manual Service and repair manual Operator's manual Service manual Quick reference guide

Contents

Genie S-105 Operator's Manual Manual pdf 42 page image

Operator's Manual Sixth Edition • Second Printing40 S-100 • S-105 • S-120 • S-125 Part No. 1261388Workplace InspectionBe aware of and avoid the following hazardoussituations:• drop-offs or holes• bumps, floor obstructions or debris• sloped surfaces• unstable or slippery surfaces• overhead obstructions and high voltageconductors• hazardous locations• inadequate surface support to withstand allload forces imposed by the machine• wind and weather conditions• the presence of unauthorized personnel• other possible unsafe conditionsDo Not Operate Unless:You learn and practice the principles of safemachine operation contained in this operator'smanual.1 Avoid hazardous situations.2 Always perform a pre-operationinspection.3 Always perform function tests prior to use.4 Inspect the workplace.Know and understand the workplaceinspection before going on to the nextsection.5 Only use the machine as it was intended.FundamentalsThe workplace inspection helps the operatordetermine if the workplace is suitable for safemachine operation. It should be performed bythe operator prior to moving the machine to theworkplace.It is the operator's responsibility to read andremember the workplace hazards, then watchfor and avoid them while moving, setting up andoperating the machine.Inspections