Genie S-120 Operators Manual With Maintenance Information

Also see for S-120: Maintenance manual Service and repair manual Operator's manual Operator's manual Service manual

Contents

Genie S-120 Operators Manual With Maintenance Information Manual pdf 28 page image

26 Genie S-120 & Genie S-125 Part No. 62756Operator's Manual First Edition · Fourth PrintingFree-wheel Configuration forWinchingChock wheels to prevent machine from rolling.4WD models: Release wheel brakes by turningover all four torque hub disconnect caps (seebelow).Be sure winch line is properly secured to drivechassis tie points and path is clear of allobstructions.Reverse procedures described to re-engagebrakes.Transport InstructionsObserve and Obey:Transport vehicle must be parked on a levelsurface.Transport vehicle must be secured to preventrolling while machine is being loaded.Be sure vehicle capacity, loading surfaces andstraps or lines are sufficient to withstandmachine weight (see Specifications section).Be sure the turntable is secured with theturntable rotation lock before transporting. Besure to unlock the turntable for operation.Securing to Truck or Trailer forTransitAlways use the turntable rotation lock pin eachtime the machine is transported.Always chock machine wheels in preparation fortransport.Use tie points on drive chassis for anchoring downto transport surface.Use chains or straps of ample load capacity.Turn key switch to the OFF position and remove keybefore transporting.Inspect entire machine for loose or unsecureditems.Transport InstructionsTransport configuration: S-120Transport configuration: S-125DisengagePositionEngagePosition