Genie Super-Straddle Operator's Manual

Also see for Super-Straddle: Service manual Operator's manual

Contents

Genie Super-Straddle Operator's Manual Manual pdf 7 page image

Operator's ManualSecond Edition • First PrintingPart No. 133409 Super-Straddle 5Tip-over HazardsDo not use the Super-Straddle except with a GenieAWP.Do not use on a sloping surface unless all fourswivel casters are locked in a position crossing theslope and their brakes are applied.Do not operate the Super-Straddle unless all fourGenie AWP outriggers are properly installed in theSuper-Straddle base, screw jack pads are in firmcontact with the ground and the straddle platform islevel.Do not operate the machine unless all retaining pinsare properly installed.Do not operate the Super-Straddle, or adjust orremove outriggers when the platform is occupied orelevated.Do not operate the machine on a slope unless it ispositioned with the length running with the slopeand the straddle platform is level.Do not move or operate the machine on stairs.Do not use the Genie Super Straddle outdoors.When raising the AWP platform, follow the ratingsfor allowable side force and number of occupants inthe Genie AWP operator’s manual.Some Genie AWP outriggers are rated for outdooruse. When using these outriggers with theSuper-Straddle, the Super-Straddle must only beused indoors.Collision HazardsBe aware of overhead obstructions. TheSuper-Straddle adds 1.2 m to the workingheight of the Genie AWP being used.Crushing HazardsKeep hands away from end frame plates andmoving parts when lowering the Super-Straddle.Electrocution HazardsThe Super-Straddle is not electrically insulated andneither by itself or together with the Genie AWPwill not provide protection from contact with orproximity to electrical current.Work Area Safety