Genie W96EBV User Manual

Contents

Vandal Resistant Dome Camera with IR LED’s6Power Supply(1) Only use a regulated CE approved DC12V power supply, such as the Genie PSU1SM.(2) To prevent fire or electrical shocks UL listed Class 2 wiring should be used on the DC12Vinput terminals.(3) Make sure that the power wiring is connected to the correct terminals. Incorrectconnection can cause permanent damage to the camera.4. Operation and Storage(1) Never point the camera directly at the sun, or any other extremely bright objects, as itcauses image smear and leads to CCD (Charge Coupled Device) damage.(2) If the camera is installed next to equipment, such as wireless devices which emit strongelectromagnetic fields, some noise may appear on the monitor.(3) Make sure the mounting surface is strong enough to support the weight of the camera.(4) Assemble the camera’s main parts in a clean and dry environment.(5) Do not stretch the cable, it may cause a disconnection.(6) Do not touch the inside of camera, even if something is wrong.(7) Before installation, be sure to disconnect the power supply first and check the groundconnection.(8) Operating temperature range: -10°C ~ +50°C (14°F ~ 122°F)Storage temperature range: -20°C ~ +60°C (-4°F ~ 140°F).5. Installation1. Carefully unpack the camera and remove it from the packaging. Undo the locking ring todisassemble the camera – as detailed in section 2.2. Drill the appropriate holes in the required mounting surface. Use the camera mountingbase as a template to position the fixing holes. Holes may also be necessary for the powerand video cables.