Genie Z-34/22 Operator's Manual

Also see for Z-34/22: Maintenance manual Operator's manual Service manual Operator's manual Operator's manual

Contents

Genie Z-34/22 Operator's Manual Manual pdf 17 page image

Operator's ManualFourth Edition • Third PrintingPart No. 1000048 Z-34/22 IC 15Scheduled MaintenanceMaintenance performed quarterly, annually andevery two years must be completed by a persontrained and qualified to perform maintenance on thismachine according to the procedures found in theservice manual for this machine.Machines that have been out of service for morethan three months must receive the quarterlyinspection before they are put back into service.Check the Tire PressureThis procedure does not needto be performed on machinesequipped with the foam-filledtire option.Bodily injury hazard. An over-inflated tire can explode and maycause death or serious injury.Tip-over hazard. Do not usetemporary flat tire repair products.To safeguard maximum stability, achieveoptimum machine handling and minimize tirewear, it is essential to maintain proper pressurein all air-filled tires.1 Check each tire with an air pressure gauge andadd air as needed.Tire pressureIndustrial tire 100 psi 6.89 barRough terrain tire 45 psi 3.1 barHigh flotation tire 44 psi 3.0 barMAINTENANCE