Genie Z-34/22 Operator's Manual

Also see for Z-34/22: Maintenance manual Operator's manual Operator's manual Service manual Operator's manual

Contents

Genie Z-34/22 Operator's Manual Manual pdf 40 page image

Operator's Manual Sixth Edition • First Printing38 Z-34/22 • Z-34/22N Part No. 1258814SpecificationsZ-34/22NHeight, working maximum 40 ft 6 in 12.5 mHeight, platform maximum 34 ft 6 in 10.5 mHeight, stowed maximum 6 ft 7 in 2 mHorizontal reach maximum 22 ft 3 in 6.8 mWidth 4 ft 10 in 1.5 mLength, stowed 18 ft 9 in 5.7 mMaximum load capacity 500 lbs 227 kgMaximum wind speed 28 mph 12.5 m/sWheelbase 6 ft 2 in 1.9 mTurning radius (outside) 13 ft 5 in 4.1 mTurning radius (inside) 7 ft 2.1 mGround clearance 5 in 12.7 cmTurntable rotation (degrees) 355°Turntable tailswing 0Power source 8 Group 902, J305,6V 315AH BatteriesDrive speeds, maximumBoom stowed 4.0 mph 6.4 km/h40 ft/6.8 sec12.2 m/6.8 secBoom 0.6 mph 1.0 km/hraised or extended 40 ft/40 sec 12.2 m/40 secControls 24V DC proportionalPlatform dimensions, 56 in x 30 in(length x width) 1.42 m x 76 cmPlatform leveling self-levelingPlatform rotation 160°AC outlet in platform standardHydraulic pressure, maximum 2800 psi(boom functions) 193 barSystem voltage 48VTires size, solid rubber 22 x 7 x 17 3 / 4 inTotal vibration value to which the hand/arm system issujected does not exceed 2.5 m/s 2Highest root mean square value of weightedacceleration to which the whole body is subjected doesnot exceed 0.5 m/s2Weight See Serial Plate(Machine weights vary with option configurations)Maximum slope rating, stowed positionCounterweight uphill 35% 19°Counterweight downhill 20% 11°Side slope 25% 14°Note: Slope rating is subject to ground conditions andadequate traction.Airborne noise emissionsSound pressure level at ground workstation < 70 dBASound pressure level at platform workstation < 70 dBAFloor Loading InformationTire load, maximum 6450 lbs 2926 kgTire contact pressure (per tire) 103 psi 7.24 kg/cm 2710 kPaOccupied floor pressure 308 psf 14.75 kPa1504 kg/m2Note: Floor loading information is approximate anddoes not incorporate different option configurations. Itshould be used only with adequate safety factors.Continuous improvement of our products is aGenie policy. Product specifications are subjectto change without notice or obligation.

/ 42

Related manuals for Genie Z-34/22