Genie ZD2812IR User Manual
                                    | |
13* OFF: BLC function does not operate.* BLC: Select LOW/MID/HIGHUser can select and define a specific area in scene and view the area clearly.Press the "ENTER" button at the AREA menu, you can change the area as shown in picture 1.Press the "ENTER" button again after area setting, you can change the area as shown in picture 2.Default: Press the Default to return to factory defaults.* RETURN:Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.NOTE* Pressing the SET button in AUTO mode allows adjustment of image brightnessby increasing or decreasing the shutter speed (x2 ~x256).* The higher the level, the brighter the image becomes, but it is possible that anafter image (ghosting) could appear.* When SENS-UP is activated the increased magnification can induce noise andpixilation; this is quite normal.Back Light(BLC)This camera which is using 3D-DNR DSP provides intelligent light level control to overcomeeven strong backlight conditions.BLCGAINAREADEFAULTRETURNMIDDLERET |
Related manuals for Genie ZD2812ACW
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine