Genie ZD2812WL User Manual

Contents

Genie ZD2812WL User Manual Manual pdf 13 page image

8※ Select one of the following 5 modes, as appropriate for your purpose.◆ ATW : Select this when the colour temperature is between 1,700˚K and 11,000˚K.◆ OUTDOOR : Select this when the colour temperature is between 1,700˚K and 11,000˚K.(sodium light inclusion)◆ INDOOR : Select this when the colour temperature is between 4,500˚K and 8,500˚K.◆ MANUAL : Select this to fine-tune White Balance manually. Set White Balance firstby using the ATW or AWC mode. After that switch to MANUAL mode,fine-tune the White Balance and then press the Function Setup switch.◆ AWC→SET : To find the optimal luminance level for the current environment, pointthe camera towards a sheet of white paper and press the FunctionSetup switch. If the environment changes, readjust it.☞ NOTE■ White Balance may not work properly under the following conditions. In this caseselect the AWC mode.① When the colour temperature of the environment surrounding the subject is out ofthe control range (e.g. clear sky or sunset).② When the ambient illumination of the subject is dim.③ If the camera is directed towards a fluorescent light or is installed in a place whereillumination changes dramatically, the White Balance operation may become unstable.● SSNR SettingSSNR illuminates darker spots of an image while retaining the same lightlevel for brighter spots to even out the overall brightness of images withhigh contrast between bright and dark spots.MAIN SETUP1.LENS2.EXPOSURE3.WHITE BAL4.SSNRDCATWOFF1. When the SETUP menu screen is displayed, select 'SSNR' by usingthe switch so that the arrow indicates 'SSNR'.2. Use the switch to change the SSNR level according to the contrastbetween bright and dark areas.