80GERBERplotter MP Series User ManualEnglishBelow is a summary of the button operation on the display:· Paper Press the PAPER button once to advance the paper 15 cm (5.90 in). This lets you fasten the paper tothe paper take-up bar using the side and center clips.Press the PAPER button for 2-3 seconds to advance the paper sufficiently to let you cut and removethe last print job.· P R I N T /PAUSEPauses or resumes the current print job.The plotter resumes printing after a STOP.If the plotter has been stopped, it resumes printing.Starts and pauses print jobs and calibration tests.· STOP Stops printing.Puts the plotter in STOP mode, so the plotter cannot receive new jobs.· MENU Accesses to the start menu or returns to the previous menu.· --> Scrolls through options.· OK Accesses to the selected option.Confirms changes and exits the current option.Confirms changes and accesses the next step in a calibration process.· + Increases the selected value. From the main menu, moves the print head to the left side of the plotter.· - Reduces the selected value.From the main menu, moves the plotter print head to the origin defined during configuration (4.4.5).5.4 DisplayPAPERMENU OK + -PRINTPAUSESTOP
