Gesipa PowerBird Operating Manual With Spare Parts List

Also see for PowerBird: Supplement to operating instructions Operating manual with spare parts list Operating instructions with spare parts list Operating manual with spare parts list

Contents

Gesipa PowerBird Operating Manual With Spare Parts List Manual pdf 14 page image

26GB4.2 No spent mandrel disposalCause Corrective measuresWrong nosepiece (No. 1) used Exchange according to table (see 1.4)Nosepiece worn (No. 1) ReplaceMandrel jammed in jaws (No. 4) Release mandrel, clean jaws and jawhousing, oil sliding surface or replace jaws(see 1.8)Inside of steel head sleeve (No. 2) dirty Clean (see 1.8)Spent mandrel container (No. 32) full Detach and emptyPassageway blocked Remove jammed mandrels and check fortrouble-free ejection (see 1.8)4.3 Red lamp indicates faultWhen pressing the trigger buttonCause Corrective measuresRiveting tool not in front end position Release trigger buttonDuring pulling operationCause Corrective measuresOverload Use tool within working range as specified intable (see 1.4.)Electronics overheated Allow riveting tool to cool down in airBattery discharged Charge or replaceAfter releasing the trigger buttonCause Corrective measuresFront end position not reached Tighten jaw mechanism (see 1.8 and 4.2)Caution!If faults occur that are indicated by the red lamp and cannot be rectified as described above,have the riveting tool repaired by a skilled technician or send it in to the manufacturer.

/ 15

Related manuals for Gesipa PowerBird