Getac B300 USB 3.0 Installation Instructions Manual
        | |
Docking HandleFigure 5Figure 6Figure 4opened or closed.*Docking station will operate with computer screencomputer is powered and ready for use.4. Boot the computer. If the dock is powered, theadded security)(The Push Button latch can be locked fordock until the latch catches (Figure 6).3. Pull the docking handle towards the front of theto ensure it is fully seated.c. Lightly press down on the back of the computeronto the Alignment Pins (Figure 5).b. Lower the back of the computerretainer (Figure 5).a. Hook the front of the computer on the front2. Set computer in the dock:docking connector. (Figure 4)been fully opened, exposing the computer'son the back of the computer) has1. Make sure the sliding door (located on theDOCKING THE COMPUTER3. Lift the computer out from under the Front Retainer.2. Lift the back of the computer off of the locating pins.1. Unlock with key if locked. Push button in until lever releases.REMOVING COMPUTER FROM THE DOCKPage 7 of 8in "Undocked"Docking ConnectorFront RetainerSliding DoorpositionDocking Handlein "Docked"position |
Related manuals for Getac B300 USB 3.0
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine