15Navigating on the ScreenThe screen of your Tablet PC is touch-sensitive. You can control the locationof the cursor/pointer on the screen using the included stylus or your finger tocommunicate with the Tablet PC.CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on thetouchscreen. Doing so may damage the touchscreen surface. Use theincluded stylus or your finger.NOTE: An optical film has been attached to the screen before shipment. Thefilm is a consumable, which will be worn out by possible scratches. You canpurchase a new one when replacement is required.Using the TouchscreenYour Tablet PC has a capacitive touchscreen. This type of touchscreenresponds to objects that have conductive properties, such as fingertips and acapacitive-tipped stylus.By default settings, your touchscreen responds best to fingertips. If youprefer using a capacitive-tipped stylus (such as the one supplied with yourmodel) or if you are wearing gloves, you should change the touchscreensettings to suit your scenario. (Use the G-Manager program and select theTouch Screen tab to set up.)The following table shows how you use the touchscreen to obtain equivalentmouse functions.Term/Action EquivalentMouse FunctionTap: Touch the screen once. Click/PointDouble-tap: Touch the screen twice rapidly. Double-clickTap and hold: Tap and hold until a popup menuappears.Right-clickDrag: Hold the stylus (or finger) on the screen and dragacross the screen until reaching your destination.Drag
