59On the Use of the RF DeviceUSA and Canada Safety Requirements andNoticesRadio Frequency Interference Requirements and SARThis device meets the government’s requirements for exposure to radiowaves.This device is designed and manufactured not to exceed the emission limitsfor exposure to radio frequency (RF) energy set by the Federal CommunicationsCommission of the U.S. Government.This device complies with FCC radiation exposure limits set forth for anuncontrolled environment.EMC RequirementsThis device uses, generates and radiates radio frequency energy. The radiofrequency energy produced by this device is well below the maximumexposure allowed by the Federal Communications Commission (FCC).This device complies with the limits for a Class B digital device pursuant toPart 15 subpart C of the FCC Rules and Regulations. Operation is subject tothe following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interferencethat may cause undesired operation.The FCC limits are designed to provide reasonable protection againstharmful interference when the equipment is installed and used inaccordance with the instruction manual and operated in a commercialenvironment. However, there is no guarantee that interference will notoccur in a particular commercial installation, or if operated in a residentialarea.If harmful interference with radio or television reception occurs when thedevice is turned on, the user must correct the situation at the user’s ownexpense. The user is encouraged to try one or more of the followingcorrective measures: