Expanding Your Computer 4-7Using the Card ReaderNOTE:z If your hard disk is divided into several drives, make sure that all drives have beenformatted before using the Card Reader. Otherwise, you may encounter problemswhen using the Card Reader.z You can use only storage cards. Your Card Reader does not support cards with I/O(input/output) functions such as a wireless network card or Bluetooth card.Your computer has a Card Reader. The Card Reader is a small drive forreading from and writing to removable storage cards (or called memorycards). The Card Reader supports Secure Digital (SD) cards.Shown next is the appearance and size of Secure Digital (SD) card typefor your reference.24×32×2.1 (mm)To insert a storage card:1. Locate the Card Reader slot on the left side of the computer.2. Align the card with its connector pointing to the slot and its labelfacing up. Slide the card into the slot until it reaches the end.3. Windows will detect the card and assign it a drive name (typically E).To remove a storage card:1. Double-click My Computer.2. Right-click the drive with the card and select Eject.3. Pull the card out of the slot.
