BIOS SetupWhen to UseYou need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOSSetup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware . You want to modify some specific settings to optimize the systemperformance.How to UseStarting BIOS SetupTo run BIOS Setup Utility, press the F2 key when the prompt appears on thescreen during the system startup. The prompt shows up on the screen foronly a few seconds. You must press the F2 key quickly. The BIOS Setup Utilitymain screen appears as shown next.Downloaded from LpManual.com Manuals
