H.264 DVR9004N Installation And Setup Manual
                                                                                                     | |
Contents
| 
43H.264 4/8/16-channel Networkable DVRsNOTE When viewing the DVR network browser interface, if the webpage appears normal but the camera images are scrambled, checkyour computer’s video adapter settings, or contact your distributor for assistance.4.2 Accessing your DVR from the InternetThe remote viewing capabilities of your DVR allow you to access and control it from anywhere in the world via the Internet. YourDVR must be setup on a LAN before this capability can be enabled, and the LAN must have a high-speed connection to the Internetfor efficient data transfer to occur. This procedure requires that the network router be configured for port forwarding. Only generalinstructions for setting up this capability are included here.1. Configure your router for port forwarding to the DVR using the network information included in Table 1. For instructions, referto the user documentation for your router and/or the information and service provided at http://portforward.com.Port forwarded for the DVR:CAUTIONBy default, your DVR uses port 8090 for the web port, 9000 for the Media port, 10510 for the Mobile server port, and 8000for the Setup port. If any of these ports are assigned to another device on your network, configure your DVR to use a differentport. Do not assign the ports used by your DVR for Web, Media, Setup or Mobile to any other device on your local network.Also, when choosing a port for port forwarding an Internet connection to your DVR, do not use any of these ports, or otherports on your network already in use.SECTION 4: NETWORKING YOUR DVR |
Related manuals for H.264 DVR9004N
manualsdatabase
Your AI-powered manual search engine