H2X THERAPOOL SE Owner's Manual
                                                                                                            | |
Contents
| 
73DO NOT DIVE.Swim spa ControlsReminder Messages129DO NOT DIVE.GENERAL MAINTENANCE HELPSReminder Messages can be suppressed by using the Reminders Screen.Reminder Messages and frequency may vary. These are general messages to remind usersabout normal swim spa maintenance. Some messages may not apply depending on the actualequipment in the swim spa.CHECK THE PHMay appear on a regular schedule, i.e. every 7 days. Check pH with a test kit and adjust pH with theappropriate chemicals.CHECK THE SANITIZERMay appear on a regular schedule, i.e. every 7 days. Check sanitizer level and other water chemistrywith a test kit and adjust with the appropriate chemicals.CLEAN THE FILTERMay appear on a regular schedule, i.e. every 30 days.TEST THE GFCI (OR RCD)May appear on a regular schedule, i.e. every 30 days.The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its reli-ability.Every user should be trained to safely test and reset the GFCI or RCD associated with the hot tubinstallation.A GFCI or RCD will have a TEST button on it that allows a user to verify proper function.CHANGE THE WATERMay appear on a regular schedule, i.e. every 180 days. Change the water in the swim spa on regularbasis to maintain proper chemical balance and sanitary conditions.Additional messages may appear on specific systems.* Reminder messages can be reset from the panel. Messages that can be reset will appear with aClear Icon at the bottom of the Message Screen. Press the Clear Icon text to reset the message.**M0XX is a Message Code. Codes like this will be seen in the Fault Log |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine