H3C IE4300-12P-PWR Installation Manual

Also see for IE4300-12P-AC: Compliance and Safety Manual

Contents

5-2Configuration terminal display issuesNo display on the configuration terminalSymptomThe switch starts up but the configuration terminal does not have any display.ResolutionTo resolve the issue:1. Verify that the power supply is supplying power correctly to the switch.2. Verify that the console cable is connected correctly.3. Verify that the console cable is in good condition.4. Verify that the terminal settings are correct.5. If the issue persists, contact H3C Support.Garbled display on the configuration terminalSymptomThe configuration terminal displays garbled texts.ResolutionTo resolve the issue:1. Verify that the configuration terminal settings are correct, as follows:{ Baud rate—9,600.{ Data bits—8.{ Parity—None.{ Stop bits—1.{ Flow control—None.2. If the issue persists, contact H3C Support.