H3C MSR800 Installation, Quick Start

H3C MSR800 Installation, Quick Start Manual pdf 1 page image

Introduction to Installation Accessories 安装附件介绍Wear an ESD wrist strap, and make sure the wrist strap has a Good skin contact and is well grounded.操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认防静电腕带已经良好接地。The installation tools are not provided with the device. Prepare them yourself.设备不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。1Cage nut(user supplied)浮动螺母（用户自备）Ring terminal接地端子M6 screw(user supplied)M6 螺钉（用户自备）M4 countersunk-headscrewM4 沉头螺钉H3C MSR800 Routers Installation Quick Start-6PW103H3C MSR800路由器快速安装指南-6PW103Tool List 工具参考Rubber pads脚垫Mounting bracket挂耳Grounding screw接地螺钉Mounting the Router on a Workbench 安装路由器到工作台Wall Mounting 壁挂安装2Flathead screwdriver一字螺丝刀Phillips screwdriver十字螺丝刀Needle-nose pliers尖嘴钳Wire-stripping pliers剥线钳ESD-preventive wrist strap防静电腕带Blow dryer热吹风Drill电钻Claw hammer羊角锤Marker记号笔Diagonal pliers斜口钳WIFI antennaWIFI天线Screw and anchor kit( User supplied )螺钉和安装导管(用户自备)Stick the rubber pads to the appropriatepositions on the router bottom将脚垫粘贴到路由器底部≥ 22 mm(0.87in)≥ 1.5 mm(0.06in)160mm（6.30in）When you mount the router on a wall, position the router so the Ethernet ports face downwards, and thesides with ventilation openings are perpendicular to the ground.安装时请将设备的以太网口朝下，设备带通风孔的两个侧面与地平面垂直。123 45 6!!

/ 2

Related manuals for H3C 6PW103