H3C SR8800-X Quick Start Installation

Also see for SR8800-X: Quick start guide Installation, quick start

H3C SR8800-X Quick Start Installation Manual pdf 1 page image

H3C SR8800-X Routers Installation Quick Start-6PW105BOM: 3104A0FUTool listInstallation accessoriesSafety recommendationsTo avoid equipment damage or bodily injury, read the following safety recommendations before installation.Note that the recommendations do not cover every possible hazardous condition.This document provides a brief guide for installing H3C SR8800-X routers. For more installationinformation, see H3C SR8800-X Routers Installation Guide.The figures in this document are for illustration only.The installation procedure is similar for the SR8800-X routers. The following uses an SR8808-Xrouter as an example unless otherwise specified.Paper manuals cannot be updated in real time with product changes.For most recent productinformation,see the E-manuals at the official website.Prepare the following installation tools yourself as required.This section only lists the most commonly used installation accessories.To prevent ESD damage, always wear an ESD wrist strap when working with the router, cards, or PCBs.Make sure the trap is reliably grounded.Do not install the router, FRUs, or cables with the power on.To avoid equipment damage or bodily injury, make sure the router is reliably grounded before powering onthe router.To ensure good ventilation, install a filler panel in an unused slot.Grounding cable ESD wrist strap M6 screw Removable cable tie Cage nutNeedle-nosepliers DiagonalpliersMarker Wire-strippingpliersClaw hammerInstalling the routerUse a pattern tool to record the installation holes of the mounting brackets and mark the cage nut holesin the rack posts accordingly.Install cage nuts on the marked square holes.Attaching cage nuts to the rackFlat-bladescrewdriver Phillipsscrewdriver

/ 4

Related manuals for H3C SR8800-X