H3C MSR830 Series Installation Manual

Also see for MSR830 Series: Manual Installation, quick start

H3C MSR830 Series Installation Manual Manual pdf 24 page image

17Verifying the installationAfter you complete the installation, verify the following information:• There is enough space for heat dissipation around the router, and the rack or workbench isstable.• The USB device, if any, is correctly installed.• The router and the power source are correctly grounded.• The correct power source is used.• The router is connected correctly to the console terminal and other devices.Accessing the router for the first timeWARNING!Before powering on the router, locate the switch for the power source so that you can cut off powerpromptly in case of an emergency.For a router starting with empty configuration, you must press Ctrl+D to access the CLI.To access the router for the first time:1. Verify that the installation and configuration environment is as described in "Verifying theinstallation."2. Power on the router.3. During the booting process, verify the following items:{ The system LED (SYS) on the front panel is flashing green at 1 Hz. For more informationabout LEDs, see "Appendix B LEDs."{ The configuration terminal displays information correctly.The router first initializes its memory at startup and then runs BootWare.System is starting...Press Ctrl+D to access BASIC-BOOTWARE MENUBooting Normal Extended BootWare***************************************************************************** ** H3C MSR830 BootWare, Version 1.12 ** *****************************************************************************Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.Compiled Date : Jun 20 2017CPU ID : 0xcCPU L1 Cache : 32KBCPU L2 Cache : 1024KBMemory Type : DDR3 SDRAMMemory Size : 1024MBFlash Size : 256MB