H3C PSR150-A Command Reference Manual

Also see for PSR300-12A Series: User manual

Contents

H3C PSR150-A Command Reference Manual Manual pdf 27 page image

1-20ViewVLAN interface viewDefault Level3: Manage levelParametersNoneDescriptionUse the mad bfd enable command to enable BFD MAD detection.Use the undo mad bfd enable command to disable BFD MAD detection.By default, BFD MAD detection is disabled.Note the following:z BFD MAD detection links are dedicated. You are not allowed to configure other services on BFDMAD detection link.z A VLAN interface enabled with BFD MAC detection and the interfaces of this VLAN do notsupport any Layer 2 and Layer 3 protocol applications, including ARP and LACP.z You cannot enable BFD MAD detection on VLAN-interface 1.Examples# Enable BFD MAD detection on VLAN-interface 3. system-view[Sysname] interface vlan-interface 3[Sysname-Vlan-interface3] mad bfd enablemad enableSyntaxmad enableundo mad enableViewAggregation interface viewDefault Level3: Manage levelParametersNoneDescriptionUse the mad enable command to enable LACP MAD detection.Use the undo mad enable command to disable LACP MAD detection.