H3C S10500 Series Configuration Manual

Also see for S10500 Series: Mpls configuration guide Installation guide Interface configuration guide Configuration guide Command reference

Contents

H3C S10500 Series Configuration Manual Manual pdf 19 page image

12Displaying and maintaining EVBExecute display commands in any view and the reset command in user view.Task CommandDisplay CDCP negotiationinformation. display evb cdcp [ interface interface-type interface-number ]Display S-channel EVB TLVnegotiation information.display evb evb-tlv [ interface interface-type { interface-number |interface-number:channel-id } ]Display S-channel information. display evb s-channel [ interface interface-type interface-number ]Display EVB summary. display evb summaryDisplay VSI interface information.display evb vsi [ verbose ] [ interface interface-type{ interface-number | interface-number:channel-id |interface-number:channel-id.vsi-local-id } ]Display information about anS-channel interface, an S-channelaggregate interface, a VSI interface,or a VSI aggregate interface.display interface [ { s-channel | schannel-aggregation }[ interface-number:channel-id |interface-number:channel-id.vsi-local-id ] ] [ brief [ description |down ] ]Clear statistics for an S-channelinterface, an S-channel aggregateinterface, a VSI interface, or a VSIaggregate interface.reset counters interface [ { s-channel | schannel-aggregation }[ interface-number:channel-id |interface-number:channel-id.vsi-local-id ] ]EVB configuration exampleNetwork requirementsAs shown in Figure 3, the Layer 2 network of a data center contains two switches that form an IRFfabric, four EVB bridges, and four EVB stations. They communicate within VLAN 100.Create VM 1 with the MAC address 0050-5684-21C7 on EVB station 1, and configure VM1 as theFTP server with a CIR of 2048 kbps and a PIR of 4096 kbps. Only the R&D center is allowed toaccess the network.