H3C S12500G-AF Series Installation Manual

Also see for S12500G-AF Series: Troubleshooting guide

A-6FigureA-8 Affixing a generic labelAffixing a label to a deviceRemove the device label and stick it to the device. You can stick a device label to any desiredposition on the device.Guidelines• When you print, write, or affix labels, keep the labels clean.• Do not use ink-jet printers and ink pens.• Affix labels with good order in alignment.• Avoid cable bents or other positions that might affect cable installation when you stick a label orbundle a cable tie with a power cord identification plate.• Bundle cable ties at the same positions of power cords, with identification plates on the sameside.• The positions of "up," "down," "right" or "left" are all based on the viewpoint of the engineeringperson who is working on the label.ExamplesThe label examples in this document are for reference only.Engineering labels for twisted-pair cablesThese labels are affixed to twisted-pair cables that connect cards in a chassis.TableA-1 Information on a label affixed to a twisted-pair cableContent Meaning ExampleMN-B-C-DMN—Rack number• M—Row number of the rack in the equipment room, in therange of A to Z.• N—Column number of the rack in the equipment room, inthe range of 01 to 99.For example, A01.B—Chassis number Numbered in top-down order with two digits, for example, 01.Adhesive sideB02 03 12TO:1 2 3