H3C S1600V2 Series Web Configuration Manual

Also see for S1600V2 Series: Installation guide

46QoS SettingsPort Rate LimitOverviewThis feature allows you to limit the total packet rate.Configuring port bandwidth settings1. From the navigation pane, select QoS Settings > Port Rate Limit.2. Select the target ports from the port list.3. Select Tx or Rx from the type list.4. Select a port rate limit state.By default, port rate limit is disabled.5. If you enable port rate limit, enter the rate limit.6. Click Submit.Figure 60 Configuring port bandwidth settingsDisplaying port bandwidth information1. From the navigation pane, select QoS Settings > Port Rate Limit.2. You can view port bandwidth information in the Port Bandwidth Info area.