H3C S3100-52P Operation Manual

Also see for S3100-52P: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

H3C S3100-52P Operation Manual Manual pdf 29 page image

Operation Manual – SSH Terminal ServiceH3C S3100-52P Ethernet Switch Chapter 1 SSH Terminal Service1-28Table 1-20 Display help information about an SFTP client commandOperation Command DescriptionEnter system view system-view —Enter SFTP client view sftp { host-ip |host-name } —Display help informationabout one or all SFTPclient commandshelp [ command-name ] OptionalVI. Specifying a source IP address or source interface for the SFTP clientYou can use the command here to specify a source IP address or source interface forthe SFTP client, thus enhancing traffic manageability.Table 1-21 Specify a source IP address/interface for the SFTP clientOperation Command DescriptionEnter system view system-view —Specify a source IPaddress for the SFTPclientsftp source-ip ip-address OptionalSpecify a source interfacefor the SFTP clientsftp source-interfaceinterface-typeinterface-numberOptionalDisplay the current sourceIP address or the IPaddress of the sourceinterface specified for theSFTP clientdisplay sftp source-ipOptionalYou can execute thiscommand in any view.1.2.4 SFTP Configuration ExampleI. Network requirementsAs shown in Figure 1-14:z Suppose SSH-related configuration has been performed on Switch A and SwitchB.z Suppose an SSH user named "abc" with password "hello" already exists.z Switch B serves as an SFTP server, with IP address 10.111.27.91.z Switch A serves as an SFTP client.

/ 32

Related manuals for H3C S3100-52P