H3C S3100-52P Operation Manual

Also see for S3100-52P: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

Operation Manual – QoSH3C S3100-52P Ethernet Switch Chapter 1 QoS Configuration1-8QoS Specification Related commandSet the priority ofprotocol packets Supported protocol-prioritySet port rate limit Supported line-rate1.3 Configuring the Mapping between 802.1p Priority andQueuesThe mapping between the local precedence and the outbound queue is one-to-one.You can modify the mapping between the 802.1p priority and the outbound queue bymodifying the mapping between the 802.1p priority and the local precedence.I. Configuration prerequisitesYou have understood the mapping between the 802.1p priority and the localprecedence and the default mapping table.II. Configuration procedureTable 1-5 Configure the mapping tableOperation Command DescriptionEnter system view system-view —Configure theCOS-to-local-precedencemapping tableqoscos-local-precedence-mapcos0-map-local-preccos1-map-local-preccos2-map-local-preccos3-map-local-preccos4-map-local-preccos5-map-local-preccos6-map-local-preccos7-map-local-precOptionalDisplay the mapping table display qoscos-local-precedence-mapOptionalYou can execute thedisplay command inany viewIII. Configuration examplez Configure the following 802.1p priority-to-local precedence mappings: 0 to 2, 1 to3, 2 to 4, 3 to 1, 4 to 7, 5 to 0, 6 to 5, and 7 to 6.z Display the configuration results.Configuration procedure: system-view