H3C S3100 Series Installation Manual

Also see for S3100 Series: Configuration Command manual Operation manual Command manual Command manual

H3C S3100 Series Installation Manual Manual pdf 22 page image

1-15z Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 HzCooling systemThe S3100-8T-SI cools off naturally.S3100-26C-SIBoth AC-powered switches and DC-powered switches are available to this model.Front panelS3100-26C-SI Ethernet switches each provide twenty-four auto-sensing 10/100Base-TX Ethernet ports,two expansion slots, and one console port.S3100-26C-SI Ethernet switches have the same front panel, as shown in Figure 1-15.Figure 1-15 Front panel of an S3100-26C-SI Ethernet switch(1) Power LED (2) A/L LED(3) D/S LED (4) Port status LED, left (yellow)(5) Port status LED, right (green) (6) 10/100Base- TX port(7) Expansion slot (8) Console port(9) Mode buttonz With a PoE card inserted in one expansion slot, an S3100-26C-SI Ethernet switch will be apowered device (PD). In this case, the other expansion slot becomes unavailable.z For details about LEDs on the front panel, refer to section “Front Panel LEDs of theS3100-T-SI/S3100-C-SI/S3100-TP-PWR-EI/ S3100-C-EPON-EI Series”.Rear panelFigure 1-16 shows the rear panel of an S3100-26C-SI AC-powered Ethernet switch.Figure 1-16 Rear panel of an S3100-26C-SI AC-powered Ethernet switch(1) AC power socket (2) Grounding screw