H3C S3100V2-52TP Installation, Quick Start

Also see for S3100V2-52TP: Installation guide Configuration guide

Tool list 工具参考Mounting the switch to a rack 安装交换机到机柜Introduction to installation accessories 安装附件介绍Grounding cable地线Rubber pads脚垫贴Cage nut and M6 screw (Usersupplied) 浮动螺母和M6螺钉(请用户自备)Mounting bracketand M4 screw挂耳和M4螺钉Attach the mounting brackets to the switchThe installation tools are not provided with the switch. Prepare them by yourself.交换机不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。Flat-head screwdriver一字螺丝刀ESD-preventive wrist strap防静电腕带Before installation, wear an ESD-preventive wrist strap, and make sure that the wriststrap has a good skin contact and is well grounded. 在以下安装交换机的过程中，操作者需佩戴防静电腕带，请确保防静电腕带已经正确接地并与皮肤良好接触。The mounting brackets can be attached to a switch for front or rear mounting. Youcan choose a proper position according to the actual requirements. 用户可以根据安装场景的需要，将挂耳安装在机箱侧面前部或者后部两种不同位置。Front mounting前部安装Rear mounting后部安装Needle-nose pliers尖嘴钳 Mounting the switch to a workbench 安装交换机到工作台Install cage nuts Mount the switch to a rack1UConnecting the grounding cable 连接保护地线Properly connect the switch grounding cable because it is crucial to the lightningprotection and electromagnetic shield (EMS) of your switch.交换机地线的正确连接是交换机防雷、防干扰的重要保障，请使用设备随机提供的保护地线正确接地。Connect the OT terminal of the groundingcable to the switch.将保护地线一端的OT端子与交换机相连Connect the grounding cable to thegrounding strip.保护地线的另一端与接地排相连12 3Stick the rubber pads to the appropriatepositions on the switch bottom粘贴脚垫到交换机底部1 2

/ 2

Related manuals for H3C S3100V2-52TP