H3C S3600-28PSI System Description

Also see for S3600-28FEI: Datasheet Operation manual Operation manual

H3C S3600-28PSI System Description Manual pdf 46 page image

System DescriptionH3C S3600 Series Ethernet Switches Chapter 2 Hardware Description2-322.6.5 Power SystemI. AC-input powerRated voltage: 100 to 240 VAC; 50 to 60 HzMax. tolerance: 90 to 264 VAC; 50 to 60 HzII. DC-input powerVoltage: -53 to -55 VDC.2.6.6 PoEThe S3600-28P-PWR-EI switch provides PoE (Power over Ethernet), that is, to supply-48V DC power to the remote powered device (PD), such as IP phone, WLAN wirelessaccess points (AP), Security, Bluetooth AP, through the twisted pair cable. As the power sourcing equipment (PSE), S3600-28P-PWR-EI supportsIEEE802.3af standard, and is also compatible with PDs that is not conformed tothis standard. The S3600-28P-PWR-EI provides power through 24 fixed Ethernet electrical ports,and thus is able to support up to 24 remote Ethernet switches with a maximumtransmission distance of 100 m (328 ft). The maximum power of each Ethernet port for the remote PD is 15.4 W. PoE input voltage ranges from -53 VDC to -55 VDC.2.6.7 Cooling SystemThe S3600-28P-PWR-EI is cooled by five fans.2.7 S3600-28P-PWR-SI Ethernet Switch2.7.1 AppearanceThe S3600-28P-PWR-SI has 24 x 10Base-T/100Base-TX Ethernet ports, four 1000Mbps SFP ports, and one Console port on its front panel, and on its rear panel both ACand DC power inputs.