H3C S3600 Series Operation Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Command manual

Contents

H3C S3600 Series Operation Manual Manual pdf 19 page image

Operation Manual – DHCPH3C S3600 Series Ethernet Switches-Release 1510 Chapter 2 DHCP Server Configuration2-12You can configure gateway addresses for address pools on a DHCP server. Currently,you can configure up to eight gateway addresses for a DHCP address pool.Table 2-9 Configure gateway addresses for DHCP clientsOperation Command DescriptionEnter system view system-view —Create a DHCPaddress pool andenter DHCPaddress pool viewdhcp server ip-poolpool-nameRequiredBy default, no global DHCPaddress pool is created.Configure gatewayaddresses forDHCP clientsgateway-listip-address&<1-8>RequiredBy default, no gatewayaddress is configured.2.2.9 Configuring Connection Between a DHCP Global Address Pool and aBIMS ServerBranch intelligent management system (BIMS) is a kind of network managementsoftware, provided by H3C Technologies Co., Ltd. With BIMS you can manage andmonitor network devices that dynamically obtain IP addresses universally andeffectively.After configuring the connection between the DHCP global address pool and the BIMSserver, you can enable the BIMS server to manage the devices that have obtained IPaddresses from the global address pool.Table 2-10 Configure connection between a DHCP global address pool and a BIMSserverOperation Command DescriptionEnter system view system-view —Create a DHCP addresspool and enter DHCPaddress pool viewdhcp server ip-poolpool-nameRequiredBy default, no DHCPglobal address pool iscreated.Configure the connectionbetween the DHCP globaladdress pool and theBIMS serverbims-server ip ip-address[ port port-number ]sharekey keyRequiredBy default, noconnection betweenthe DHCP globaladdress pool and theBIMS server isconfigured.