H3C S3610 Series Operation Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Command manual

H3C S3610 Series Operation Manual Manual pdf 8 page image

Operation Manual – System Maintaining and DebuggingH3C S3610&S5510 Series Ethernet Switches Chapter 1 Basic Configurations1-7To do… Use the command… RemarksConfigure the banner to bedisplayed when a user enters userviewheader shell text OptionalConfigure the banner to bedisplayed before login header motd text Optional1.1.5 Configuring CLI HotkeysFollow these steps to configure CLI hotkeys:To do… Use the command… RemarksEnter system view system-view —Configure CLI hotkeyshotkey { CTRL_G |CTRL_L | CTRL_O |CTRL_T | CTRL_U }commandOptionalThe , and hotkeys arespecified with commandlines by default.Display hotkeys display hotkeyAvailable in any view.Refer to Table 1-2 forhotkeys reserved by thesystem.Note:By default, the , and hotkeys are configured with commandline and the and commands are NULL.z corresponds to the display current-configuration command.z corresponds to the display ip routing-table command.z corresponds to the undo debugging all command.Table 1-2 Hotkeys reserved by the systemHotkey Function Moves the cursor to the beginning of the current line. Moves the cursor one character to the left. Stops performing a command. Deletes the character at the current cursor position. Moves the cursor to the end of the current line. Moves the cursor one character to the right.