H3C S5500-EI Series Operation Manual – Port Security

Also see for S5500-EI series: Operation manual Operation manual Configuration guide Configuration guide Operation manual

Contents

H3C S5500-EI Series Operation Manual – Port Security Manual pdf 22 page image

Operation Manual – Port SecurityH3C S5500-EI Series Ethernet Switches Chapter 1 Port Security Configuration1-21Quiet Period 60 s, Quiet Period Timer is disabledSupp Timeout 30 s, Server Timeout 100 sThe maximal retransmitting times 2EAD quick deploy configuration:EAD timeout: 30 mThe maximum 802.1X user resource number is 1024 per slotTotal current used 802.1X resource number is 1GigabitEthernet1/0/1 is link-up802.1X protocol is enabledHandshake is enabledThe port is an authenticatorAuthentication Mode is AutoPort Control Type is Mac-based802.1X Multicast-trigger is enabledGuest VLAN: 0Max number of on-line users is 256EAPOL Packet: Tx 16331, Rx 102Sent EAP Request/Identity Packets : 16316EAP Request/Challenge Packets: 6EAP Success Packets: 4, Fail Packets: 5Received EAPOL Start Packets : 6EAPOL LogOff Packets: 2EAP Response/Identity Packets : 80EAP Response/Challenge Packets: 6Error Packets: 01. Authenticated user : MAC address: 0002-0000-0011Controlled User(s) amount to 1In addition, since NTK is enabled, frames with unknown destination MAC addresses,multicast addresses, and broadcast addresses should be discarded.1.11 Troubleshooting Port Security1.11.1 Cannot Set the Port Security ModeI. SymptomCannot set the port security mode.[Switch-GigabitEthernet1/0/1] port-security port-mode autolearn

/ 24

Related manuals for H3C S5500-EI series