6 system-view[Sysname] snmp-agent group v3 ?STRING<1-32> Group nameIn this example, the SNMPv3 group name is an argument of the STRING type. It can contain 1 to 32characters, each of which can be any printable character except the question mark (?), quotation mark(“), backward slash (\), and the blank space. You can enter a value such as test-v3.Entering incomplete keywordsYou can enter a command comprising incomplete keywords that can uniquely identify the completecommand.In user view, for example, commands starting with an s include startup saved-configuration andsystem-view.• To enter system view, enter sy.• To set the configuration file to be used at the next startup, enter st s.You can also press Tab to have an incomplete keyword automatically completed.Configuring command aliasesThe command alias function allows you to replace the first keyword of a command with your preferredkeyword. For example, if you configure show as the replacement for the display keyword, then to executethe display xx command, you can enter the command alias show xx.Note the following guidelines when configuring command aliases:• When you enter a command alias, the system displays and saves the command in its originalformat instead of its alias. In other words, you can define and use a command alias but thecommand is not restored in its alias format.• When you define a command alias, the cmdkey and alias arguments must be in their completeform.• When you enter an incomplete keyword that partially matches both a defined alias and thekeyword of a command and the command alias function is enabled, the alias takes precedence. Toexecute the command whose keyword partially matches your input, enter the complete keyword.When you enter a character string that partially matches multiple aliases, the system gives youprompts.• If you press Tab after you enter an alias keyword, the original format of the keyword is displayed.• You can replace only the first keyword of a non-undo command instead of the complete command.You can replace only the second keyword of undo commands.Follow these steps to configure command aliases:To do… Use the command… RemarksEnter system view system-view —Enable the command alias function command-alias enableRequiredDisabled by default, which meansyou cannot configure commandaliases.Configure a command alias command-alias mapping cmdkeyaliasRequiredNot configured by default.
