Operation Manual – IPv6 ConfigurationH3C S5500-SI Series Ethernet Switches Chapter 2 IPv6 Application Configuration2-42.5 TFTP ConfigurationIPv6 supports TFTP (Trivial File Transfer Protocol). As a client, the device candownload files from or upload files to a TFTP server.2.5.1 Configuration PreparationStart the TFTP server and specify the route to download or upload files. Refer to TFTPserver configuration specifications for specific instructions.2.5.2 TFTP ConfigurationI. Manage users’ access to TFTP serversFollow these steps to configure the relation of ACL to TFTP application:To do… Use the command… RemarksEnter system view system-view —Configure the relation ofACL to TFTP applicationto enable or disable theaccess to a specific TFTPservertftp-server ipv6 aclacl-numberRequiredACL is not related toTFTP application bydefault.II. Download filesFollowing the following steps to download files from TFTP serversTo do… Use the command… RemarksDownload filesfrom TFTP servertftp ipv6 remote-system [ -i interface-typeinterface-number ] get source-filename[ destination-filename ]RequiredAvailable inuser viewCaution:It is required to specify the -i parameter when the destination address is a link localaddress.III. Upload filesFollow the following steps to upload files to TFTP servers: