Operation Manual – Cluster ManagementH3C S3610&S5510 Series Ethernet Switches Chapter 1 Cluster Management Configuration1-161.4.4 Enabling the Cluster FunctionRefer to Enabling the Cluster Function.1.4.5 Deleting a Member Device from a ClusterTo do… Use the command… RemarksEnter system view system-view —Enter cluster view cluster —Delete a member devicefrom the cluster undo administrator-address Required1.5 Configuring Access Between the Management Deviceand Its Member DevicesAfter having successfully configured NDP, NTDP and cluster, you can configure,manage and monitor the member devices through the management device. You canmanage member devices in a cluster through switching from the operation interface ofthe management device to that of a member device or configure the managementdevice by switching from the operation interface of a member device to that of themanagement device.Follow these steps to configure access between member devices of a cluster:To do… Use the command… RemarksSwitch from the operation deviceof the management device tothat of a member devicecluster switch-to{ member-number |mac-address mac-address |sysname member-sysname }RequiredSwitch from the operationinterface of a member device tothat of the management devicecluster switch-toadministrator Required