H3C S5800 Configuration Manual

Also see for s5800 series: Installation manual Instruction manual Command reference Quick start Troubleshooting guide

Contents

H3C S5800 Configuration Manual Manual pdf 19 page image

11ACSEI timersAn ACSEI server uses two timers, the clock synchronization timer and the monitoring timer.• The clock synchronization timer periodically triggers the ACSEI server to send clock synchronizationadvertisements to ACSEI clients. You can set this timer through command lines.• The monitoring timer periodically triggers the ACSEI server to send monitoring requests to ACSEIclients. You can set this timer through command lines.An ACSEI client starts two timers, the registration timer and the monitoring timer.• The registration timer periodically triggers the ACSEI client to multicast registration requests with themulticast MAC address being 010F-E200-0021. You cannot set this timer.• The monitoring timer periodically triggers the ACSEI client to send monitoring requests to the ACSEIserver. You cannot set this timer.ACSEI startup and runningACSEI starts up and runs in the following procedures:1. Run the ACSEI client application to enable ACSEI client.2. Start up the device and enable the ACSEI server function on it.3. The ACSEI client multicasts registration requests.4. After the ACSEI server receives a valid registration request, it negotiates parameters with theACSEI client and establishes connection with the client if the negotiation succeeds.5. The ACSEI server and the ACSEI client mutually monitor the connection.6. If detecting the disconnection of the ACSEI client, the ACFP server will remove the configurationand policies associated with the client.ACSEI server configuration (switch)The section covers these topics:• Enabling ACSEI server• Configuring the clock synchronization timer• Configuring the monitoring timer• Closing an ACSEI client• Restarting an ACSEI client• Displaying and maintaining ACSEI serverEnabling ACSEI serverFollow these steps to enable ACSEI server:To do… Use the command… RemarksEnter system view system-view —Enable ACSEI server acsei server enable RequiredDisabled by default.

/ 22

Related manuals for H3C s5800 series