72Displaying and maintaining RRPPTo do… Use the command… RemarksDisplay brief RRPP information display rrpp brief [ | { begin | exclude |include } regular-expression ]Display RRPP group configurationinformationdisplay rrpp ring-group [ ring-group-id ] [ |{ begin | exclude | include } regular-expression ]Display detailed RRPP informationdisplay rrpp verbose domain domain-id [ ringring-id ] [ | { begin | exclude | include }regular-expression ]Display RRPP statisticsdisplay rrpp statistics domain domain-id [ ringring-id ] [ | { begin | exclude | include }regular-expression ]Available in any viewClear RRPP statistics reset rrpp statistics domain domain-id [ ringring-id ]Available in userviewRRPP configuration examplesSingle ring configuration exampleNetworking requirements• Device A, Device B, Device C, and Device D form RRPP domain 1. Specify the primary control VLANof RRPP domain 1 as VLAN 4092, and specify that RRPP domain 1 protects VLANs 1 through 30.• Device A, Device B, Device C and Device D form primary ring 1.○ Specify Device A as the master node of primary ring 1, GigabitEthernet 1/0/1 as the primaryport, and GigabitEthernet 1/0/2 as the secondary port.○ Specify Device B, Device C and Device D as the transit nodes of primary ring 1, theirGigabitEthernet 1/0/1 as the primary port, and GigabitEthernet 1/0/2 as the secondaryport.Figure 20 Network diagram for single ring configuration
