8Management Ethernet portThe S5820X-26S and S5820X-28S switches have one management Ethernet port. You can connect thisport to a PC or management station for loading and debugging system software or remote management.Table 5 Management Ethernet port specificationsItem SpecificationConnector type RJ-45Connector quantity 1Port transmission rate 10/100/1000 Mbps, half/full duplexTransmission medium and maxtransmission distance 100 m (328.1 ft) over category-5 twisted pair cableFunctions and services Switch software and Boot ROM upgrade, network managementUSB portEvery S5820X switch has one OHC-compliant USB2.0 port that can upload and download data at arate up to 12 Mbps. You can use this USB port to access the file system on the Flash of the switch, forexample, to upload or download application and configuration files.NOTE:USB devices from different vendors vary in compatibility and driver. H3C does not guarantee correctoperation of USB devices from other vendors on the switch. If a USB device does not operate correctly onthe switch, replace it with one from another vendor.10/100/1000Base-T Ethernet portEvery S5820X switch has 10/100/1000Base-T Ethernet ports.Table 6 10/100/1000Base-T Ethernet port specificationsItem SpecificationConnector type RJ-45Interface attributes• 10 Mbps, full duplex• 100 Mbps, full duplex• 1000 Mbps, full duplex• MDI/MDI-X, auto-sensingMax transmissiondistance 100 m (328.08 ft)Transmission medium Category-5 (or above) twisted pair cableStandards IEEE 802.3i, 802.3u, 802.3ab
