4Examples# Display the IRF fabric topology. display irf topologyTopology Info-------------------------------------------------------------------------IRF-Port1 IRF-Port2Switch Link neighbor Link neighbor Belong To2 DOWN -- UP 1 0023-8927-ad541 UP 2 DIS -- 0023-8927-ad54Table 3 Command outputField DescriptionSwitch Member ID.IRF-Port 1 Link state and neighbor switch of IRF port 1.IRF-Port 2 Link state and neighbor switch of IRF port 2.LinkLink state of the IRF port:• UP—IRF link is up.• DOWN—IRF link is down.• DIS—No physical ports have been bound to the IRF port. You must use theport group interface command to bind at least one physical port to the IRFport.neighbor IRF member ID of the switch connected to the IRF port.If no device is connected to the IRF port, this field displays two hyphens (--).Belong To IRF fabric that has the switch, represented by the CPU MAC address of themaster in the IRF fabric.display irf-port load-sharing modeUse display irf-port load-sharing mode to display IRF link load sharing mode.Syntaxdisplay irf-port load-sharing mode [ irf-port [ member-id/port-number ] ] [ | { begin | exclude | include }regular-expression ]ViewsAny viewDefault command level1: Monitor levelParametersirf-port: Displays IRF port specific load sharing modes.member-id/port-number: Specifies an IRF port number. The member-id argument represents an IRFmember ID. The port-number argument represents the index number (1 or 2) of the IRF port on themember device.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see Fundamentals Configuration Guide.
