H3C S5820X Series Quick Start Manual

Also see for s5820x series: Command reference Troubleshooting guide High availability configuration guide Configuration guide Configuration guide

Contents

H3C S5820X Series Quick Start Manual Manual pdf 12 page image

7Installing an S5820X-26S switch in a 19-inchrackTable 1 Installing an S5820X-26S switch in a 19-inch rackInstallation procedure Remarks Installation diagram1. Attach the mountingbrackets to theswitch.Required• For mounting near the powermodules, see Figure 8.• For mounting near the ports,see Figure 9.2. Attach chassis railsto the switch. Required• For mounting near the ports,see Figure 8.• For mounting near the powermodules, see Figure 9.3. Install cage nuts inthe rack posts. Required See Figure 10.4. Attach slide rails tothe rack posts. Required See Figure 11.5. Connect thegrounding cable tothe primarygrounding point.Optional See Figure 12.6. Install the switch inthe rack. RequiredSee Figure 13. This figure uses themounting position near the powermodules as an example.NOTE:• The depth of the rack must be a minimum of 1000 mm (39.37 in).• The S5820X-26S switch has three grounding points, as shown in Figure19. The primary grounding point and auxiliary grounding point 1 areon the right side panel. If you use one of these grounding points, youmust connect the grounding cable to the grounding point before youmount the switch in the rack.