H3C S6820 Series Installation Manual

Also see for S6820 Series: Command reference Configuration Examples

Contents

H3C S6820 Series Installation Manual Manual pdf 63 page image

56Table 25 QSFP+ fiber cables available for the QSFP+ and QSFP28 portsQSFP+ fiber cable Cable lengthQSFP-40G-D-AOC-7M 7 m (22.97 ft)QSFP-40G-D-AOC-10M 10 m (32.81 ft)QSFP-40G-D-AOC-20M 20 m (65.62 ft)Table 26 QSFP+ to SFP+ copper cables available for the QSFP+ and QSFP28 portsQSFP+ to SFP+ copper cable Max transmission distanceLSWM1QSTK3 1 m (3.28 ft)LSWM1QSTK4 3 m (9.84 ft)LSWM1QSTK5 5 m (16.40 ft)NOTE:• You can use a QSFP-40G-SR4-MM850 or QSFP-40G-CSR4-MM850 transceiver module toconnect a QSFP+ port to four SFP+ ports. The QSFP+ transceiver module and SFP+ transceivermodules to be connected must be the same in specifications, including central wavelength andfiber type.• Only F6207 and later versions support the QSFP-100G-ER4L-WDM1300 modules.• Only F6206 and later versions support the QSFP-100G-SWDM4-MM850 modules.• MPO connectors include physical contact (PC) connectors with a flat-polished face andangle-polished contact (APC) connectors with an angle-polished face (8°).QSFP+ portThe LSWM116Q provides 16 QSFP+ ports, the LSWM18QC provides 8 QSFP+ ports, andLSWM124XG2Q, LSWM124XG2QFC, LSWM124XG2QL, and LSWM124XGT2Q each provide 2QSFP+ ports. You can install the following QSFP+ modules and cables in the QSFP+ ports:• QSFP+ transceiver modules in Table 23.• QSFP+ copper cables in Table 24.• QSFP+ fiber cables in Table 25.• QSFP+ to SFP+ copper cables in Table 26.The QSFP+ ports on the LSWM116Q interface card cannot be split into four SFP+ ports.SFP28 portThe S6820-56HF switch provides 48 SFP28 ports. The LSWM124TG2H provides 24 SFP28 ports.The SFP28 ports support the following transceiver modules and cables:• SFP28 transceiver modules in Table 27.• 25-GE SFP28 copper cables in Table 28.• 25-GE SFP fiber cables in Table 29.• 10-GE SFP+ transceiver modules in Table 15.• 10-GE SFP+ copper cables in Table 16.• 10-GE SFP+ fiber cables in Table 17.