2-9Figure2-14 Mounting the switch in the tank (2)Installing/removing power modulesWARNING!• To avoid bodily injury and device damage, strictly follow the procedures in Figure2-15 andFigure2-16 to install and remove a power module.• Provide a separate circuit breaker for each power module.The switch comes with two power module slots each installed with a power module. You can replacea power module as required.Figure2-15 Installation procedureFigure2-16 Removal procedureSafety guidelinesTo prevent device damage and even bodily injury, follow these restrictions and guidelines when youinstall or remove a power module:• Always wear an ESD wrist strap and make sure the strap makes good skin contact.Install the powermoduleConnect the powercordSwitch on the circuitbreakerSwitch off the circuitbreakerDisconnect the powercordRemove the powermodule

H3C S6850-56HF-IM Manual