H3C S6850 Series Installation Manual

Also see for S6850 Series: Manual Troubleshooting guide Configuration guide Installation guide Compliance and Safety Manual

Contents

51Configuration terminal display problemsNo displaySymptomThe configuration terminal displays nothing when the switch is powered on.SolutionTo resolve the issue:1. Verify that the power system is operating correctly.2. Verify that the console cable is connected correctly.3. Verify that the console cable does not have any problems and the terminal settings are correct.4. If the issue persists, contact H3C Support.Garbled displaySymptomThe configuration terminal has a garbled display.SolutionTo resolve the issue:1. Verify that the following settings are configured for the terminal:{ Baud rate—9,600.{ Data bits—8.{ Parity—None.{ Stop bits—1.{ Flow control—None.2. If the issue persists, contact H3C Support.