H3C S7500 Series Command Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

Contents

H3C S7500 Series Command Manual Manual pdf 13 page image

Command Manual – ARPH3C S7500 Series Ethernet Switches Chapter 1 ARP Configuration Commands1-12DescriptionUse the display arp attack-list command to display the ARP attack information,including the attacking MAC address, IP address and the attack time.Examples# Display the ARP attack information. display arp attack-listMAC ADDR VLAN IP ADDR PORT NAME LAST-ATTACK COUNT0000-0000-0001 2 172.1.1.2 Ethernet2/0/1 15:05:34 09/30 21.1.15 display arp entry-limitSyntaxdisplay arp entry-limit [ interface-type interface-number ]ViewAny viewParametersinterface-type: Port type.interface-number: Port number.DescriptionUse the display arp entry-limit command to display the number limits of ARP entries.If you specify a port, the command will display the total maximum number of ARPentries and the maximum number of dynamic ARP entries on the port.If you do not specify a port, the command will display the total maximum number ofARP entries and the maximum number of dynamic ARP entries on each port.Examples# Display the current number limits of ARP entries. display arp entry-limitThe maximum ARP entry number is 8192The maximum dynamic ARP entry number of the port GigabitEthernet0/0/1 is 2048The maximum dynamic ARP entry number of the port GigabitEthernet0/0/2 is 2048The maximum dynamic ARP entry number of the port GigabitEthernet0/0/3 is 2048The maximum dynamic ARP entry number of the port GigabitEthernet0/0/4 is 2048The maximum dynamic ARP entry number of the port GigabitEthernet3/0/1 is 6000……

/ 18

Related manuals for H3C S7500 Series

H3C S7500 Series Command Manual

H3C S9500 Series Command Manual

This manual is suitable for:

S7500 Series

manualsdatabase

Your AI-powered manual search engine