H3C S7500 Series Operation Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Command manual Command manual

Contents

H3C S7500 Series Operation Manual Manual pdf 2 page image

Operation Manual – ClusterH3C S7500 Series Ethernet Switches Chapter 1 Cluster1-1Chapter 1 ClusterWhen configuring cluster, go to these sections for information you are interested in:z Cluster Overviewz Management Device Configurationz Member Device Configurationz Intra-Cluster Configurationz Displaying and Maintaining a Clusterz Cluster Configuration Example1.1 Cluster Overview1.1.1 Introduction to HGMP V2A cluster is implemented through Huawei group management protocol (HGMP V2). Byemploying HGMP V2, a network administrator can manage multiple switches using thepublic IP address of a switch known as a management device. The switches under themanagement are member devices. The management device, along with the memberdevices, forms a cluster. Normally, a public IP address is not assigned to a memberdevice. Management and maintenance operations intended for the member devices ina cluster are redirected by the management device. Figure 1-1 illustrates a typicalcluster implementation.Network Management Station69. 110.1. 100Network69. 110Management DeviceMember DeviceMember DeviceMember Device.1.1rFigure 1-1 Diagram for clusteHGMP V2 offers the following advantages:

/ 18

Related manuals for H3C S7500 Series

H3C S7500 Series Operation Manual

This manual is suitable for:

S7500 Series

manualsdatabase

Your AI-powered manual search engine