H3C S7500 Series Operation Manual
Also see for S7500 Series: Operation manualOperation manualOperation manualOperation manualCommand manual
                | |
Operation Manual – SNMP and RMONH3C S7500 Series Ethernet Switches Chapter 1 SNMP Configuration1-7To do… Use the command… RemarksSet aging time for trapmessages snmp-agent trap life secondsOptionalThe defaultaging time fortrap messagesis 120seconds.1.4 Displaying SNMPTo do… Use the command… RemarksDisplay systeminformation of the currentSNMP devicedisplay snmp-agent sys-info [ contact| location | version ]*Display statistics onSNMP packets display snmp-agent statisticsDisplay the engine ID ofthe current devicedisplay snmp-agent { local-engineid |remote-engineid }Display group informationabout the devicedisplay snmp-agent group[ group-name ]Display SNMP userinformationdisplay snmp-agent usm-user[ engineid engineid | usernameuser-name | group group-name ]Display the currentlyconfigured communitynamedisplay snmp-agent community [ read| write ]Display the currentlyconfigured MIB viewdisplay snmp-agent mib-view[ exclude | include | viewnameview-name ]Available inany view1.5 SNMP Configuration Example1.5.1 SNMP Configuration ExampleI. Network requirementsz An NMS and Switch A are connected through the Ethernet. The IP address of theNMS is 10.10.10.1 and that of the VLAN interface on Switch A is 10.10.10.2.z Perform the following configuration on Switch A: setting the community name andaccess right, administrator ID, contact and switch location, and enabling the switchto sent trap messages. |
Related manuals for H3C S7500 Series
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
H3C S7500 Series Operation Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine