H3C S7500E Series Installation, Quick Start

Also see for H3C S7500E Series: Installation manual Operation manual Command manual Installation manual Configuration guide

Contents

H3C S7500E Series Installation, Quick Start Manual pdf 11 page image

8Installing mounting brackets and cable management bracketsInstalling the cable management brackets on the S7506E-VThe S7506E-V has two cable management brackets: the one with a tray is installed at the lower part ofthe switch, and the one without a tray is installed at the upper part of the switch. They are installed in thesame way.To install a cable management bracket:1. Unpack the cable management brackets.2. Attach the cable management bracket to the chassis, and align the screws with the screw holes inthe chassis, as shown in Figure 9.3. Fasten the screws.Figure 9 Installing cable management brackets on an S7506E-VInstalling the cable management brackets on other modelsFor the models except the S7506E-V, install the cable management bracket on the left mounting bracket,as shown in Figure 10. The switch is supplied with two mounting brackets, and the one with the cablemanagement bracket screw holes is the left mounting bracket.