H3C S9500E Series Connecting Manual

Also see for S9500E Series: Card Manual Command reference Configuration guide Quick start guide Security configuration guide

Contents

H3C S9500E Series Connecting Manual Manual pdf 3 page image

2Table 1 Console cable pinoutsRJ-45 pin Signal DB-9 pin Signal1 RTS 8 CTS2 DTR 6 DSR3 TXD 2 RXD4 CD 5 SG5 GND 5 SG6 RXD 3 TXD7 DSR 4 DTR8 CTS 7 RTSFigure 2 Connecting the switch and the PC through the console portTo connect the console cable:1. Connect the DB-9 connector of the console cable to the serial port of a PC or terminal.2. Connect the RJ-45 connector of the console cable to the console port of the MPU of the switch.NOTE:When you remove the console cable, first unplug the RJ-45 end, and then the DB-9 end.Setting up a configuration environment1. Select Start > All Programs > Accessories > Communications > HyperTerminal.The Connection Description dialog box appears.2. Enter the name of the new connection in the Name field and click OK.